Ellsen blacksmith forging hammers are widely used by blacksmith to do art forging, such as drawing-out, upsetting, punching, chiseling, forging welding, bending and twisting. it is also used for forging in bolster dies. Striking Capacity :9kg, 16kg, 25kg, 40kg, 55kg, 75kg, 110kg, 150kg, 250kg, 400kg, 560kg, 750kg, 1000kg, 2000kg, you can choose power hammer according to your detailed needs.
Technical Parameter of Blacksmith Power Hammer
| Items | c41-16kg | c41-20kg | c41-25kg | c41-40kg | c41-75kg | c41-150kg |
| Attack energy(j) | 18 | 22 | 27 | 53 | 100 | 200 |
| Work sector altitude(mm) | 180 | 200 | 240 | 245 | 300 | 370 |
| Attack number of times(t/min) | 260 | 255 | 250 | 250 | 210 | 180 |
| Malleable side steel length of side(mm) | 20*20 | 30*30 | 40*40 | 52*52 | 65*65 | 130*130 |
| Malleable round steel length of side(mm) | 22 | 35 | 45 | 68 | 85 | 145 |
| Uses for parts the power(kw) | 1.5kw/220/1ph | 2.2kw/220/1ph | 2.2 | 4 | 7.5 | 15 |
| 1.5kw/380/3ph | 2.2kw/380/3ph | |||||
| Electrical rotational speed(r.p.m) | 1440 | 1440 | 1440 | 1440 | 1440 | 1470 |
| Anvil weight(kg) | – | 200 | 250 | 400 | 850 | 1800 |
| G.W. | 240 | 500 | 760 | 1350 | 2800 | 5060 |
| Size | 584*390*952 | 670*369*1050 | 800*410*1213 | 1080*600*1389 | 1600*950*1950 | 2080*1240*2350 |
Success Case:
As a reliable and professional supplier and manufacture of penumatic power hammer, we are dedicated to providing high quality power hammer for our clients. Until now, our power hammer have been applied to many countries, such as USA, UK, Australia, Canada, New Zealand, Ireland, Mexico, Malaysia, etc. Please contact us if you need a forging power hammer. We will give you further details according to your needs.
Features of Blacksmith Power Hammer
+ ready operation: economic and convenient
+ easy to operate, by manipulating the hand lever or foot-pedal, all operating functions—idle run, top setting, pressing down, single blow, light or full series blow can be obtained as desired
+ a special oil-pump is provided for lubricating the cylinders. prior to running, turn the hand-crank of the pump to get the cylinders being lubricated beforehand.